Coffee Forums banner

E37SD parts

7K views 33 replies 9 participants last post by  KGart0n 
#1 ·
Hello all. I'm looking to purchase a set of the 'zero retention bellows' that come with the SD models for my E37S. I'm also after the rubber cap that attaches to the grounds chute. I believe the chute cap has a part number of 70165 but I cannot find a part number for the bellows.

Please could anyone help with a part number and also point me in the direction of somehere that may be able to supply the parts? Google has failed me so far...

Cheers, Andrew
 
#2 ·
I am looking at purchasing one as well, and failed to find one. perhaps Bellabarista could get some stock from Italy?

I THINK it will fit my grinder, but it would be great if somebody could confirm the diameter of the part of the grinder where the bellow sits? (basically the diameter of the bellow grinder side)

Thanks
 
#3 ·
  • Like
Reactions: Carlo
#5 ·
These are too small to fit into the rubber bit on their own. The corrugated bottles are great though. I found it fits into the chef's squeezy bottle I was using to begin with just brilliantly.

Gas Automotive wheel system Kitchen appliance Automotive tire Office equipment


Auto part Gas Automotive wheel system Nickel Machine


/monthly_2021_01/20210128_225129.mp4.2019fa40430c8f33bdfc66ba2ac821d3.mp4" type="video/mp4"> View attachment 20210128_225129.mp4
 

Attachments

#9 ·
I contacted Ceado directly who forwarded my email onto espresso-solutions.co.uk, who seem to be the official UK parts supplier. They were really helpful and provided me with a parts diagram for the E37SD. From this I could work out that in order to mod my E37S I would need the following parts:

CEA90354 - Bellows and dose funnel
CEA40316 - Bellows support
CEA70250 - Chute cover
CEA40319 - M8 bean distributer/burr safety nut

All of these parts are now available on their website. Be warned though; they are expensive for what they are.

Particularly expensive was the bellows support piece. This is pictured next to the original hopper support in one of the pics for comparison. Unfortunately this piece is needed as the original hopper support has gaps which allow air to flow out rather than through the grinder. The hopper support is also slightly shorter meaning that when the bellows are pressed down the funnel hits the burr nut.

All in all this was an expensive mod/upgrade but it does allow me to run my SD in both hopper mode and SD mode - something that the standard SD model can't do. The grind quality and workflow when in SD mode is also great, so I'm pleased from that perspective too.<img alt="20210216_195449.jpg.7ca1e0bd60b6d3c4c991d2d175c2a4c0.jpg" data-fileid="53148" data-src="<fileStore.core_Attachment>/monthly_2021_02/20210216_195449.jpg.7ca1e0bd60b6d3c4c991d2d175c2a4c0.jpg" src="https://www.coffeeforums.co.uk/applications/core/interface/js/spacer.png"><img alt="20210216_195404.jpg.d8ecfbe454055deb2cb328e1002c05c9.jpg" data-fileid="53149" data-src="<fileStore.core_Attachment>/monthly_2021_02/20210216_195404.jpg.d8ecfbe454055deb2cb328e1002c05c9.jpg" src="https://www.coffeeforums.co.uk/applications/core/interface/js/spacer.png"><img alt="20210216_195544.jpg.468de380c3248831545b6a9221e899b8.jpg" data-fileid="53150" data-src="<fileStore.core_Attachment>/monthly_2021_02/20210216_195544.jpg.468de380c3248831545b6a9221e899b8.jpg" src="https://www.coffeeforums.co.uk/applications/core/interface/js/spacer.png"><img alt="20210216_195631.jpg.0cfa7ad740df593e98574b09ff8eadf1.jpg" data-fileid="53151" data-src="<fileStore.core_Attachment>/monthly_2021_02/20210216_195631.jpg.0cfa7ad740df593e98574b09ff8eadf1.jpg" src="https://www.coffeeforums.co.uk/applications/core/interface/js/spacer.png">
 

Attachments

#24 · (Edited by Moderator)
All in all this was an expensive mod/upgrade but it does allow me to run my SD in both hopper mode and SD mode - something that the standard SD model can't do. The grind quality and workflow when in SD mode is also great, so I'm pleased from that perspective too.
I am exactly looking for the same versatility like your setup here, since I found a good deal on a latest E37S with quick set and touch screen. I do need to make multiple shots on some weekends, normally during the week it's just 2 shots in the morning.

I've gathered the parts breakdown and main differences between the recent iterations of E37S and E37SD according to this list:

2015 E37S (Adjustable anti-static flap. That's the version with the hole on the side for adjusting the flap)

2017 E37S (Fixed anti-static flap. Removed the adjustment hole introduced in the previous version)

2018 E37S (Touch Screen)

2019 E37S (Quick set gear w/o swing out mechanism, part #5)

E37SD (Quick set gear w/ swing out mechanism, part #6, bellows and dose funnel, bellows support, chute cover, M8 bean distributer/burr safety nut, lower RPM more torque?, titanium burrs)

E37T (larger motor, thermal fan control chamber, titanium coating as SD, different burr geometry (different from SD?), redirecting spout there might be just enough room when using certain portafilter funnel or dosing cup on the S and SD)

Can you kindly elaborate where is the CEA40319 - M8 bean distributer/burr safety nut ?

Also were you able to find out if the lack of the flapper from 2017-2019 E37S (#23 in 2019 parts breakdown) does anything to clumping?
 
#11 ·
Thanks. The hardest part was removing the original burr nut. Thankfully another post in this forum informed me that the nut is threaded in reverse meaning that in order to undo the nut you need to turn clockwise!

Brexit has made sourcing parts from Europe more difficult too - hence the delay Espresso Solutions experienced getting their shipment of parts from Ceado.
 
#17 ·

Attachments

#18 ·
I've ordered the bellows (£62 inc. shipping costs) and have plans to fabricate a part that will allow me to use it without spending the additional £240 or so on the other parts listed above.

I'll try to remember to take pics along the way and will post the results.
 
#19 ·
I've ordered the bellows (£62 inc. shipping costs) and have plans to fabricate a part that will allow me to use it without spending the additional £240 or so on the other parts listed above.
I'll try to remember to take pics along the way and will post the results.
Nice! I wish I was as creative with the design side - would have avoided an overtime shift [emoji1]
 
#22 ·
Well, I finally got the Ceado bellows a few weeks ago. I used it with the first part I made (see previous page) but I decided to use up another big chunk of my time making a different design. It's no better, I just prefer the look. Tire Automotive tire Drinkware Gas Wood


By the way, if anyone plans to order the bellows from espresso solutions, BEWARE!

I did not enjoy my first (and last) experience with them. Constant incorrect expected delivery dates, took almost 2mths to come but the worst thing was that when it did finally arrive, they demanded more money. Their explanation:

As per our terms and conditions, we reserve the right to change the prices at any time without notifying you.

Wow!

Btw - lIst price is not the £45.90 + vat I paid at the time of order - it's now £80.27 + vat!

Automotive tire Gas Scientific instrument Electric blue Automotive wheel system
 

Attachments

  • Like
Reactions: Happyguy
#29 · (Edited by Moderator)
Thank you guys, looks like I'm sold on the E37S.

@axpetts I see what you mean now. It's this mushroom bolt, CEA40319 - M8 bean distributer/burr safety nut.

White Font Circle Auto part Drawing


My would be E37S comes with this hopper support that has locking tabs.

White Product Drinkware Gesture Font


Can you confirm that I would need to swap out for the following:

White Organism Font Circle Auto part


CEA90354 - Bellows and dose funnel
CEA40316 - Bellows support

It seems like those who really want that swing out quick set for brew can technically swap out these parts.

White Product Font Circle Drawing
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top