Jump to content

Vibe to rotary - questions before starting...


Recommended Posts

Hi All,

I've decided to convert by vibe/tank only Brewtus IV to a rotary/mains feed machine. I am competent with both electrics and plumbing - this job is easy work for me.

Parts are being ordered as i type... saves me buying a R58 or Vesuvius (for now)....

I have the manual from Whole Latte Love (WLL) and the job seems simple enough (attached if anyone wants a copy).

However - there is 1 sticking point the manual appears to miss (hence my main question).... and then a few points for clarity please, if I may...

Q1.i

If i understand correctly, the OPV in the vibe machine returns 'overflow' water to the tank. In the WLL guide, they have a new OPV on the water line just after the pump (pictured)... but where does the 'overflow' pipe (orange arrow) go?

Q1.ii.

I've seen alternative installs where the OPV is not used. As the pump is set to 9Bar and the other valve (name escapes me) is set to 11/12Bar - can I ignore the OPV altogether? 

Q2.
For clarification: I intend to fit a main pressure reducer. With the rotary pump adjusted to 9Bar, the main inlet pressure to the pump should be adjusted to 6Bar. Is this correct?

 

Screenshot 2020-11-20 at 08.53.27.png

EXPOBAR_BREWTUS_Rotary_Pump_Conversion.pdf

Edited by bongo
missed Q 1.ii

Ghe sboro fioi!

Link to post
Share on other sites

Thanks for the rapid response Dave - I think i edited the questions just as you posted....and then again as you edited your first response. Apologies.

So if I understand -

  1. Yes -the OPV is still needed.
  2. The OPV pipe must go to the drip tray (there wont be a tank).
  3. Mains pressure should be set to 3Bar.

Q3.

How does the pipe return to the drip tray please?

The only way I can see is drilling a hole in the back of the drip tray and putting the pipe through the hole in the body that was previously used to adjust the OPV with a screw driver (pictured).

I do not intend to use mains drainage.

Screenshot 2020-11-20 at 09.23.07.png

Ghe sboro fioi!

Link to post
Share on other sites

I'd drill a second hole much higher up under the angled lip, use a small pipe and you may not need to cut the drip tray...where you want to put it would be quite low down and  significantly reduce the capacity of the drip tray.

Edited by DavecUK
  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • About
    Coffee Forums UK is the UK's premier coffee forum Started in June 2008 by Glenn Watson, we now have more than 24000 mainly UK based members, and welcome more than 3000 members and visitors from around the world each day! With strategic investment and digital expertise from the Jackson Lockhart team (Tait Pollack and Adam Bateman), we are taking Coffee Forums UK to the next level, and are delighted to share the journey with you.

    New Members:
    We are often referred to as the friendliest forum on the web and we look forward to welcoming you onboard. Please read our Terms of Use. We stick by them, existing members please familiarise yourselves with them.

    Advertising

    Coffee Forums Media Kit

    Click Here To Buy Advertising Space 
    £100 p/m when paid yearly, up-to: 690000 banner impressions per month!

     

    coffee-subscription-mini.png

    Become a friend of CFUK
    Buy Us A Monthly Coffee (massive thank you!) 

     

    Donate / Sponsor

    Click Here To Donate (big thank you!)

    Get Your Supporter Badge Today (per year)

    image.png



    Coffee Forums Logo
     

×
×
  • Create New...