Jump to content

Recommended Posts

I have been pondering whether to make some funnels as there has been intermittent interest in the Norvin type ones . I did make one to enable it to be used with a Niche cup to a La Pavoni basket. I’ll put a picture below .  This was made from a solid piece of aluminium and proved to me life is too short to do it that way . I have managed to find some tube which may make it more bearable and have ordered some . If successful in the making and doesn’t take too much time I will update this thread .. The Ebay alternatives I guess would be a far cheaper way to go 🥴

C1D7D292-0E29-45BD-902E-4EDF0721AA30.jpeg

02ED5FD6-4C35-417F-B0AA-721158791C2D.jpeg

  • Like 2

Share this post


Link to post
Share on other sites

Love that one ^^^

What about a wood turned one

  • Like 1

2019 L-R with hand turned Thuya burr handles and toggles / Monolith Titan Flat & Conical, MAX Flat on order  / HG-1 / Kalita wave / Stag kettle / OCD / Joey Skateboard Handle Pullman Big Step & matching stirrer / Wenge Handle Lev Tamp / Push Tamper / Puqpress / 15g & 18g vst / IMS 35μM / LDT / Barista Gear Titanium 12oz pitchers / LW Bean Cellars & Caddy / Decent thermometer / Acme Evo 150ml cups / Espazzola / Hottop / embroidered by me bar towels / in the cellars: Steampunk, North Star, Foundry, The Barn, HasBean, Coffee Compass / part-time LSOL participant / 6 gorgeous guineas / a dog / a very lovely husband 

 

Share this post


Link to post
Share on other sites
2 minutes ago, MildredM said:

Love that one ^^^

What about a wood turned one emoji3166.png

That would be a lot easier  and less time consuming , may  need to be lacquered unless you used something Like Blackwood which polishes up really well 🤔 .. 

Share this post


Link to post
Share on other sites
That would be a lot easier  and less time consuming , may  need to be lacquered unless you used something Like Blackwood which polishes up really well .. 


I Like they idea
  • Like 1

2019 L-R with hand turned Thuya burr handles and toggles / Monolith Titan Flat & Conical, MAX Flat on order  / HG-1 / Kalita wave / Stag kettle / OCD / Joey Skateboard Handle Pullman Big Step & matching stirrer / Wenge Handle Lev Tamp / Push Tamper / Puqpress / 15g & 18g vst / IMS 35μM / LDT / Barista Gear Titanium 12oz pitchers / LW Bean Cellars & Caddy / Decent thermometer / Acme Evo 150ml cups / Espazzola / Hottop / embroidered by me bar towels / in the cellars: Steampunk, North Star, Foundry, The Barn, HasBean, Coffee Compass / part-time LSOL participant / 6 gorgeous guineas / a dog / a very lovely husband 

 

Share this post


Link to post
Share on other sites

I’m the one to blame for the first post .

 

It works really well with the Niche and the Pavoni as it not only works as an adapter but also as a funnel. It has every day usage with me.

 

Ps: and that steam tip too.

  • Thanks 1

Share this post


Link to post
Share on other sites

I'd be in...

  • Like 1

Ve ve suvivius.... /E37s/ Eazytamp / tupperware pot / completely healthy relationship with coffee (and bank manager).

Share this post


Link to post
Share on other sites

Hi @Nicknak do you think you might consider the same fit as 'Tidaka' version, where it sits on-top of the basket rather than inside?

  • Like 1

Vesuvius • Hario VST-2000B • Distributor • Push Tamper • Niche Grinder

Share this post


Link to post
Share on other sites
3 minutes ago, igm45 said:

I'd be in...

You can have the pine prototype 🥴😂😂

  • Like 1

Share this post


Link to post
Share on other sites
1 minute ago, Les996 said:

Hi @Nicknak do you think you might consider the same fit as 'Tidaka' version, where it sits on-top of the basket rather than inside?

In wood or aluminium 😬 ..  The aluminium I’d have to see re tube I can get it might have to be done from solid 🤯😤 £££££££ 🤑😄

  • Like 1

Share this post


Link to post
Share on other sites

lol...was thinking aluminium...how about stainless, that would keep you busy for a few hours or more 😀

  • Confused 1

Vesuvius • Hario VST-2000B • Distributor • Push Tamper • Niche Grinder

Share this post


Link to post
Share on other sites
15 minutes ago, Les996 said:

lol...was thinking aluminium...how about stainless, that would keep you busy for a few hours or more 😀

I was warming to you until you mentioned stainless ..🥴 Aluminium is possible .. stainless would be tedious and very likely make me suicidal .. I’m sure I can find you something on the Web 😬

  • Like 1
  • Haha 1

Share this post


Link to post
Share on other sites
4 hours ago, MildredM said:

 


I Like they idea emoji2.png

 

Well just for you @MildredM I have been slaving over a hot lathe 😂

5B3D8CC8-3687-4818-935E-9FECA40C56B8.jpeg

32960382-3D2A-4D53-B3FC-4893C7F5F999.jpeg

2636ED09-E59D-454A-B98B-7987F57460BF.jpeg

  • Like 6

Share this post


Link to post
Share on other sites

Oh MY 😳😳😳😳😳

Is that the right size for *mine* 🧐


2019 L-R with hand turned Thuya burr handles and toggles / Monolith Titan Flat & Conical, MAX Flat on order  / HG-1 / Kalita wave / Stag kettle / OCD / Joey Skateboard Handle Pullman Big Step & matching stirrer / Wenge Handle Lev Tamp / Push Tamper / Puqpress / 15g & 18g vst / IMS 35μM / LDT / Barista Gear Titanium 12oz pitchers / LW Bean Cellars & Caddy / Decent thermometer / Acme Evo 150ml cups / Espazzola / Hottop / embroidered by me bar towels / in the cellars: Steampunk, North Star, Foundry, The Barn, HasBean, Coffee Compass / part-time LSOL participant / 6 gorgeous guineas / a dog / a very lovely husband 

 

Share this post


Link to post
Share on other sites
Well just for you @MildredM I have been slaving over a hot lathe
5B3D8CC8-3687-4818-935E-9FECA40C56B8.thumb.jpeg.2dc4463613b814dd9ea0de6c72bc9d34.jpeg
32960382-3D2A-4D53-B3FC-4893C7F5F999.thumb.jpeg.5b5c331942b2b87ad0ec76ea5c8ea256.jpeg
2636ED09-E59D-454A-B98B-7987F57460BF.thumb.jpeg.2ea0aa2b41b3b8def845aa73cfa46b7b.jpeg
Looks great
  • Like 1

Ve ve suvivius.... /E37s/ Eazytamp / tupperware pot / completely healthy relationship with coffee (and bank manager).

Share this post


Link to post
Share on other sites
3 minutes ago, MildredM said:

Oh MY 😳😳😳😳😳

Is that the right size for *mine* 🧐

It was a bit of fun after your post .. It’s for a 58mm Portafilter .. I rushed it to get it done only sanded to 120 grit I would have to do yours to 2500 and then buff it ..I know what your like .. No I won’t do it in Thuya Burr 😂😂😂

  • Like 3

Share this post


Link to post
Share on other sites
1 hour ago, Nicknak said:

It was a bit of fun after your post .. It’s for a 58mm Portafilter .. I rushed it to get it done only sanded to 120 grit I would have to do yours to 2500 and then buff it ..I know what your like .. No I won’t do it in Thuya Burr 😂😂😂

Chicken 😂 

Hmmm let's see what wood we are going for and do it all matchy-matchy 😁 😁 

  • Like 1

2019 L-R with hand turned Thuya burr handles and toggles / Monolith Titan Flat & Conical, MAX Flat on order  / HG-1 / Kalita wave / Stag kettle / OCD / Joey Skateboard Handle Pullman Big Step & matching stirrer / Wenge Handle Lev Tamp / Push Tamper / Puqpress / 15g & 18g vst / IMS 35μM / LDT / Barista Gear Titanium 12oz pitchers / LW Bean Cellars & Caddy / Decent thermometer / Acme Evo 150ml cups / Espazzola / Hottop / embroidered by me bar towels / in the cellars: Steampunk, North Star, Foundry, The Barn, HasBean, Coffee Compass / part-time LSOL participant / 6 gorgeous guineas / a dog / a very lovely husband 

 

Share this post


Link to post
Share on other sites
1 hour ago, MildredM said:

Chicken 😂 

Hmmm let's see what wood we are going for and do it all matchy-matchy 😁 😁 

Oh yes it all needs to match ... We could do Thuya and glue , lots of glue 😂😂

  • Like 2

Share this post


Link to post
Share on other sites
Well just for you @MildredM I have been slaving over a hot lathe
5B3D8CC8-3687-4818-935E-9FECA40C56B8.thumb.jpeg.2dc4463613b814dd9ea0de6c72bc9d34.jpeg
32960382-3D2A-4D53-B3FC-4893C7F5F999.thumb.jpeg.5b5c331942b2b87ad0ec76ea5c8ea256.jpeg
2636ED09-E59D-454A-B98B-7987F57460BF.thumb.jpeg.2ea0aa2b41b3b8def845aa73cfa46b7b.jpeg
That looks really nice. Do you take bespoke commissions? I need something a little niche to aid loading my single basket.
  • Like 1

Laissez les bons temps rouler

Share this post


Link to post
Share on other sites

Another brilliant effort mate. Love the stuff you do.

  • Like 1

Machine - Currently a Londinium R. Grinder - Niche. Tamper/distributor - Puqpress and Pullman Distribution and Big Step Palm Tamper.

Share this post


Link to post
Share on other sites
8 hours ago, ashcroc said:
15 hours ago, Nicknak said:
Well just for you @MildredM I have been slaving over a hot lathe emoji23.png
5B3D8CC8-3687-4818-935E-9FECA40C56B8.thumb.jpeg.2dc4463613b814dd9ea0de6c72bc9d34.jpeg
32960382-3D2A-4D53-B3FC-4893C7F5F999.thumb.jpeg.5b5c331942b2b87ad0ec76ea5c8ea256.jpeg
2636ED09-E59D-454A-B98B-7987F57460BF.thumb.jpeg.2ea0aa2b41b3b8def845aa73cfa46b7b.jpeg

That looks really nice. Do you take bespoke commissions? I need something a little niche to aid loading my single basket.

Thanks ...What are you looking for ..

Share this post


Link to post
Share on other sites
Thanks ...What are you looking for ..
Basically a ring that'll fit snugly in a 58mm single basket that I can dose into & ideally tamp through with my 41mm tamper.

Laissez les bons temps rouler

Share this post


Link to post
Share on other sites
1 minute ago, ashcroc said:
36 minutes ago, Nicknak said:
Thanks ...What are you looking for ..

Basically a ring that'll fit snugly in a 58mm single basket that I can dose into & ideally tamp through with my 41mm tamper.

  I am sure that can be done , @ashcroc .. I am also intrigued 58mm basket and small tamper 🤔.  If you want PM me and we take talk design features etc .. Be warned I ask a lot of questions 🥴

Share this post


Link to post
Share on other sites
18 hours ago, Nicknak said:

Well just for you @MildredM I have been slaving over a hot lathe 😂

5B3D8CC8-3687-4818-935E-9FECA40C56B8.jpeg

32960382-3D2A-4D53-B3FC-4893C7F5F999.jpeg

2636ED09-E59D-454A-B98B-7987F57460BF.jpeg

Great work, great idea as usual.

  • Like 2

Lelit Bianca/Mazzer Major/Several odd cups, one milk jug and a yen to do good latte art/ Four horses/four cats/3 dogs/7 chickens. :o

Share this post


Link to post
Share on other sites

I think we may need a ticket system in place here - form an orderly queue, please 😛

  • Like 1
  • Haha 1

2019 L-R with hand turned Thuya burr handles and toggles / Monolith Titan Flat & Conical, MAX Flat on order  / HG-1 / Kalita wave / Stag kettle / OCD / Joey Skateboard Handle Pullman Big Step & matching stirrer / Wenge Handle Lev Tamp / Push Tamper / Puqpress / 15g & 18g vst / IMS 35μM / LDT / Barista Gear Titanium 12oz pitchers / LW Bean Cellars & Caddy / Decent thermometer / Acme Evo 150ml cups / Espazzola / Hottop / embroidered by me bar towels / in the cellars: Steampunk, North Star, Foundry, The Barn, HasBean, Coffee Compass / part-time LSOL participant / 6 gorgeous guineas / a dog / a very lovely husband 

 

Share this post


Link to post
Share on other sites
  I am sure that can be done , @ashcroc .. I am also intrigued 58mm basket and small tamper .  If you want PM me and we take talk design features etc .. Be warned I ask a lot of questions
It's probably better described as a 42mm basket with big shiulders to fit a 58mm portafilter.
Think it'll be easiest if I send them over to you so you can check the fit as you're going. Will PM after work.
  • Like 1

Laissez les bons temps rouler

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • About:

    Coffee Forums UK is the UK's premier coffee forum Started in June 2008 by Glenn Watson, we now have more than 22000 mainly UK based members, and welcome more than 3000 members and visitors from around the world each day! With strategic investment and digital expertise from the Jackson Lockhart team (Tait Pollack and Adam Bateman), we are taking Coffee Forums UK to the next level, and are delighted to share the journey with you.

    New Members:

    We are often referred to as the friendliest forum on the web and we look forward to welcoming you onboard.

    Terms of Use

    Advertising

    Coffee Forums Media Kit

    Buy Advertising Space

    Donate

    Get Your Supporter Badge (per year)

×
×
  • Create New...