Coffee Forums banner

Loose fitting water tank on Londinium L1

2K views 12 replies 3 participants last post by  Thecatlinux 
#1 ·
Just got this through in the post and I'm gagging to get it fired up but it doesn't feel like the water tank is seated right.

On my Rocket Giotto the tank properly latched into place and you knew it was in where as this just feels like it's bobbing around a bit. The nipple is definitely seated but it feels like the tank is sat a bit too high and the cover doesn't sit quite flush with the top of the machine.

I've tried gently pushing it once it's seated but it just pops back up. Any ideas?
 
#11 ·
I forwarded Reiss some pictures of the tank, valve and how it was seated and he thought all looked in order and it may just be a stiff o-ring in the valve. I've filled it with water and it sits much better now so we're good to go! Thanks for the suggestions and I'll report back once I've got the beast dialled in!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top