Search the Community
Showing results for tags 'setting'.
Found 1 result
So, took my Aergrind apart today and layed it out, it unsurprisingly works in essentially the same way as the Feldgrind. You dont actually need to fully disassemble the grinder to remove the burr assembly. You can just keep winding the settings coarser until the grind setting collar (2) comes off, then the bottom burr assembly will pull out of the bottom. [Having now added an o-ring, this will actually be more difficult with the o-ring installed as the bearing struggles to push past it] There should be a o-ring here: If your Aergrind is very easy to adjust or seems to be slipping as you grind this is probably the culprit. Anyway - Knock are kind enough to be one step ahead of their own mistakes in this case and provide some spare o-rings in the pack (or at least the KS ones did) so I was able to fix immidiately. Haven't tested yet but as there was only a little slip without the o-ring I imagine this is now fixed. I'll probably be putting my Aergrind up for sale soon now that this is fixed. I dont really need the portability and although it likely makes no difference in the cup it has more burr wobble than the Feld so given the choice I'm sticking with it's larger older brother!