Search the Community
Showing results for tags 'mazzer sj and mini'.
Found 1 result
Tools for removing the lower burr carrier and checking run-out / wobble. The carrier can be removed by applying heat with a "heat gun" if not too tight, otherwise a simple puller can be fabricated. Depending on the model either 4 mm X 60 mm for the mini OR 5 mm X 70 mm for the SJ pins /bolts will be required. A piece of steel plate about 70 mm square OR diameter. A 6 mm nut & bolt for the centre part of the puller. A piece of dowel Or a chopstick to prevent the carrier from rotating while undoing centre bolt. (DO NOT USE METAL) The spare bolt at left of photo is a longer centre bolt to fit into grinder for the puller to work against as the carrier bolt does not always allow sufficient extraction of the burr carrier before it hits the bolt head If you want to check run-out of carrier you will require T D I gauge and a means of attaching it to the grinder (magnetic stand and a piece of steel to sit it on)