Jump to content

Mark dyer

Members
  • Content Count

    8
  • Joined

  • Last visited

Community Reputation

1 Neutral

About Mark dyer

  • Other groups Active
  • Rank
    Green Bean

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Thanks for the reply. In your opinion what size batteries do I get and what do you class as a good make inverter.
  2. Hi all I'm lost and stuck of what to do about an inverter. I have a coffee van that has been running off a 5.5kva generator, I have brought myself a fracino contempo dual fuel coffee machine so I can use something different rather than a generator. The more I read and watch videos about inverters the more unsure and lost I became. So people I'm after what people use and what the make is I'm pretty sure i need a 2000w inverter to peek at 4000w but i might be wrong. I have a fracino contempo dual fuel coffee machine , a fridge , a freezer and a strobe light. Any information and help would be great and if you could break it down in layman's terms that would be great. Thanks mark
  3. Hi I hope someone can help me. I brought a second hand fracino dual fuel contempo coffee machine I didn't realise it dont have an internal water pump and I have very little water pressure can anyone recommend which one to buy. Thanks mark
  4. Hi all im a mobile coffee van and I brought a second hand fracino contempo dual fuel coffee machine and I didn't realise it doesn't have an internal water pump first of all what is the best water pump to get for it?. Second do you fit it near the coffee machine? Third the system I have is I have one pump that dose all I.e sink hot water tank and coffee machine I'm guessing I will have to change the system? It will be amazing how people help others on here and I'm hoping some kind person or people will no the answer to my problems. Thanks for reading Mark
  5. Hi el carajillo Thanks for the reply. I guess its possible it's to a water pump. I have checked the manual and it doesn't say anything about a separate water pump but tomorrow I'm going to have a look and see where it goes to. Is the printed board the buttons or a circuit board somewhere else? Thanks mark Newboy uk Thanks for your help. Silly question where is the control board is it the one behind the touch pad? Thanks mark I would like to thank you for your help on this one newboyuk it worked and I owe you one. Mark
  6. Newboyuk I will try it in the morning and get back to you if it works you will make this very happy. Thanks mark
  7. Hi el carajillo Thanks for the reply. I guess its possible it's to a water pump. I have checked the manual and it doesn't say anything about a separate water pump but tomorrow I'm going to have a look and see where it goes to. Is the printed board the buttons or a circuit board somewhere else? Thanks mark Newboy uk Thanks for your help. Silly question where is the control board is it the one behind the touch pad? Thanks mark
  8. Hi all please can someone help me I'm pulling my hair out well if I had any. I brought a second hand machine last week to go in my coffee van. On Thursday I took my old machine out and put the new one in ( at that time it was working fine) I plumped it all in,sorted the waste out and plugged it in again all worked fine. As its dual fuel and I'm not a gas engineer I left the gas well alone and thought I will use it on electric until I get it sorted. Now the part I messed up. There is 2 cables coming out of the machine one had a plug on it which put power in the machine the other one had no plug on and looked as tho it hadn't been used so first question what is that used for? Then the real bad part as I thought the cable wasnt live as it had no plug on it it touched the side of the machine and tripped the van out so to my shock it must be live. When taped the cable up the put the trip back up to my relief everything came back on including the machine but now when I press the controll buttons on the front I get nothing on both groupers everything else works and it gets upto temperature and all pressures are correct but obviously I cant get any coffee out of the machine. So the next question is there a fues in the machine that works both sides or is it something more serious. Thanks in advance I really need some help.
×
×
  • Create New...