Jump to content

B-Roadie

Members
  • Content Count

    315
  • Joined

  • Last visited

Community Reputation

169 Excellent

About B-Roadie

  • Rank
    Senior Member

Your Profile

  • Location
    UK
  • Interests
    Motorsport, Cycling, Coffee

Recent Profile Visitors

1,845 profile views
  1. Machine now collected by buyer’s courier.
  2. Happy to honour the £500 ex shipping offer as above. It is on eBay at £600 ex shipping. It is listed on eBay but not on an auction, it’s essentially a classified ad so I can remove anytime without contravening eBay’s policies. I’d prefer it went to a member here. Let me know if you’re happy and We can move to PM
  3. It’s worth mentioning that a GC will never have incredible temperature stability as there isn’t an awful lot of thermal mass in its design. However, for the ~£120 and a bit of tinkering it’ll cost you, you’d likely get that back in a few minutes this time should you choose.
  4. Have you got cups on top? Try removing/moving them. I do sometimes have a similar sound although quieter in a situation where a particular cup might take a dislike to where it’s sitting, I just move it a touch and it stops. Bella Barista usually remove them to do their pre delivery inspection but is there a transit nut still attached underneath? It’s a wing nut usually.
  5. Single dosing or a light load in the hopper will slow the grind speed down significantly.
  6. Grinder now shipped. Mods: Please move to sold, thank you.
  7. Bump before eBay. Price reduced to £500. Mainland UK postage available from APPROX £25.
  8. We have a deal. Lets move to PM.
  9. There will be duty to pay although that depends on the tariff code associated with the product. Most coffee hardware is pretty low on duty but that is mostly espresso machines and grinders, accessories may be different. You will have to pay VAT though and likely a handling charge to the courier for customs clearance. These will likely be more than the duty on a product like this.
  10. Thanks for the reply. I did see your post and did some research. I’m not sure that ‘the single’ is quite what I’m after.
  11. Apologies. I did measure it but didn’t add to the text. 450mm deep 280mm wide 360mm tall (396mm inc cup rail) Cup rail can be removed.
  12. Looking for a premium single shot basket in the 7-9g range. VST, LM, IMS etc. Funnel to suit above basket. Tamper to suit. Ideally tamp-through set up with the funnel. What can I say? I’m single shot curious.
  13. My Mignon MkII now in the FS section on its own listing.
  14. For sale is my Eureka Mignon MkII grinder which I have owned since new and was originally purchased from Bella Barista. This model uses 50mm flat burrs and does have the timer function via the dial on the right hand side. In excellent condition throughout and will continue to perform exceptionally well for years to come. There is a TINY chip on the rear of the grinder that does not go right through the paint and a chip to the skirt on the bottom of the hopper. The hopper is not cracked and the chip does not extend up to the area where the beans are held. I dropped the hopper when cleaning it o
  15. Isomac Millennium E61 HX machine which I purchased during lockdown. The machine was working extremely well when I purchased it and had no leaks or anything untoward, no scale etc but it did need a service. I have just given the machine a thorough service including: Complete strip of E61 group head. Strip and rebuild of steam and hot water valves. Replaced all valves, springs, gaskets and cam in the group head. Partial strip, clean and rebuild of machine internals. Upgraded vacuum breaker valve so that it vents into the drip tray. Upgraded water tank micro switch.
×
×
  • Create New...